AMFA5000TERAZ TYMCZASOWE OD $365.00 NA $273.00
PROMOCJA WAŻNA WCIĄŻ PRZEZ
GODZINY
Zamów AMFA5000
  • Zamówione przed 23:59, dostarczone jutro za darmo
  • Bezpłatne zwroty
Klienci oceniają nas na 4,6 z 5

Water hardness Franeker

Are you curious about the water hardness in Franeker?? The average hardness of the water here is 6.70 dH. This does not mean that the water in your home has exactly that hardness, but your water will probably not deviate far from this. Fortunately, at 6.70 dH, the water hardness in Franeker is not extremely high. However, that does not alter the fact that you may still suffer from limescale. There are approximately 119.26 grams of lime in one m³ of water. If you suffer from limescale, you can order an Amfa4000® from us.

The advantages of the Amfa4000®

If you live in Franeker and you notice that the water hardness in Franeker causes limescale deposits? Then we offer you the Amfa4000®. This alternative to a water softener does not need to be installed by a technician. You can easily do this yourself. The magnets of the anti-limescale system prevent calcium and magnesium from binding together. These are the causes of limescale. The Amfa4000® offers you the following benefits:

  • Significantly less limescale deposits
  • Cheap to buy
  • The Amfa4000® requires no maintenance

What about the water hardness in Franeker?

The average water hardness in Franeker is 6.70 dH, as you have read above. Now the water hardness in your home depends on the exact location. 6.70 dH is not particularly high. If you use 150 m³ of water in one year, your water will contain 17.8 kilos of lime per year. It is therefore no wonder that you suffer from limescale in your home. With the help of the Amfa4000®, the amount of lime in your water can be significantly reduced, by up to 85%. Your boiler and kettle also heat up faster and household appliances last longer. On an annual basis this can save you quite a lot of money, so you will quickly earn back the Amfa4000®.

The water in Franeker

The tap water in Franeker is provided by Vitens. At 6.70 dH, the water hardness in Franeker is normal, perhaps even slightly lower than the average in the Netherlands. If we compare Franeker with Southern Europe, where the hardness can be 50 dH, then you are certainly not wrong here. Nevertheless, with this water hardness you can still suffer from limescale deposits. You can solve this with an Amfa4000®.

Want to know more?

If you would like to receive more information about the Amfa4000® or about the water hardness in Franeker? Please feel free to contact us. We are happy to tell you more about hard water and the benefits of our anti-limescale system.

Polski