AMFA5000MOST IDEIGLENESEN $365.00 -tól $273.00 -ig
AZ AKCIÓ MÉG
ÓRÁIG ÉRVÉNYES
Rendelés AMFA5000
  • 23:59 előtt rendelve, holnap ingyenesen szállítjuk
  • Ingyenes visszaküldés
Ügyfeleink 5-ből 4,6-ra értékelnek minket

Water hardness in Haren

The water hardness in most parts of Haren is around 7.7 dH. This makes the water quite hard. In general this is fine, but there is still a significant amount of lime in the water. The amount of lime in Baarn and therefore the hardness of the water depend on the exact location of your home. With a water hardness of 7.7 dH, there is still about 137 grams of lime in 1000 liters of water. A Dutch 4-person household uses approximately 191,000 liters per year. Of course, you won't receive all of this, but it will leave some traces. The Amfa4000® solves this problem and we are happy to help you with it.

Reduce water hardness in Haren

You can reduce your water hardness in Haren with the Amfa4000®. If you live in Baarn and want to reduce the hardness of your water, we offer you this solution. The Amfa4000® ensures that the amount of lime in the water is reduced. An anti-limescale system is an excellent alternative to a water softener. This way, serious limescale deposits will soon be a thing of the past. Simply attaching the anti-limescale system in a few minutes works wonders. The magnets ensure that the magnesium and calcium particles do not bond with each other. This makes your water softer. This not only affects the taste of the water, but it also has a positive effect on the lifespan of your household appliances. The water hardness gives you an idea of ​​the amount of lime in your water. You can conclude that the water leaves traces of limescale. This makes your shower and other household equipment dirtier. Your water in the kettle or boiler also heats up faster when you have softer water, which saves you energy costs.

  • Limitation of limescale deposits
  • Cleaner look in the bathroom
  • Lower energy costs

Average water hardness in Haren

You now know that your water hardness in Haren is 7.7 dH. However, there is very little you can do with this without comparison material. To ensure that you get a good picture, it is important to know that the average water hardness in the Netherlands is 8 dH. The water hardness in Haren is therefore below the Dutch average. Haren also performs better than the water hardness of 50 dH in some parts of Southern Europe, but there is still room for improvement. You can achieve this with the Amfa4000®. Please contact if you have any questions, we are happy to help!

magyar